Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form :(

Vertical Machining Center

High Acceleration

Based on advanced design concepts, Cubic introduces a new generation of CNC tapping centers. Each machine exhibits the efficiency and accuracy you have come to expect.

Machine Structure

The structural parts of the machine are manufactured from high quality Meehanite cast iron, rib reinforced and stress relieved to assure the machine remains deformation-free year after year. Servo motors directly drive ballscrews, providing high positioning accuracy without backlash.

Chip Auger

A chip auger is mounted at the center of the base, delivering chips to the chip cart located at the backside of machine. The chip auger frees operator from manually removing and chips while maintaining a clean interior of machine at all times.

X, Y-axis Telescopic Guard

The telescopic guards on X, Y-axis prevent chips from coolant from damaging linear ways.

Linear Ways on 3 Axes

The X, Y, Z-axis slideways are mounted with precision linear guide ways, combined with great span between guides, exhibiting maximum stability during high speed traverse. The ball type linear ways feature low friction coefficient and high positioning accuracy. The three axes are driven by FANUC digital AC servo motors with fast acceleration and deceleration.

Z-axis Telescopic Guard

To meet the high speed traverse of Z-axis, the guard is a combination of canvas and steel plates. It provides superior protection for linear ways and extends their service life.

Automatic tool changer

  • TR-510 / TR-600 / TR-700
  • #30 Armless Type Magazine
  • 12 tools
Tool change time
1.4 sec.
(Tool to Tool)

21 Tool Servo ATC (optional)

High Precision Spindle

  • TR-510 / TR-600 / TR-700
  • #30 Taper
  • Direct Drive
Spindle Speed
10,000 min-1
NBT with two sides binding

15,000 min-1 (optional)

Control Specifications

CPU 32 bit
Max. controlled axes 4
Max. simultaneous axes 4
Program storage length 320 M
Macro variables common 600
Tool offset sets 200
Conversational programming O
Display 8.4” TFT LCD
Multi-language display O
Servo system with ABS. encoder O
Memory card O
Ethernet O
High speed and accuracy machining code G0.5.1 Q1
RS-232 interface O
Program route simulation O

Quality Control

The positioning accuracy is inspected by using Agilent Technologies laserinterferometer unit. Positioning accuracy in full travel is less than 0.010m

Diameter Ø100 mm, F=3000 mm/min, circularity 0.010 mm. HEIDENHAIN grid encoder is used to ensure dynamic contouring accuracy.

Optional Equipment

Movable, large capacity coolant tank

  • Equipped with castors for pulling the coolant tank out from the machine. This permits convenient and fast cleaning of tank inside.
  • The large capacity coolant tank is equipped with filter screen to filter coolant impurity.

CNC rotary table (4th or 5th axis)

The use of motor with absolute encoder on tilting shaft is recommended.

5C indexer

Tool length measurement and breakage detection

Transformer and Spindle oil chiller


TRAVEL X-axis 450 mm 17.71 in 510 mm 20 in
Y-axis 300 mm 11.81 in 400 mm 15.74 in
Z-axis 300 mm 11.81 in 400 mm 15.74 in
Table to spindle nose 175~475 mm 6.9~18.7 in 150~550 mm 5.9~21.6 inn
TABLE Table area 500×320 mm 19.68×12.6 in 600×420 mm 23.62×16.53 in
Max. load 200 kgs 440 lbs 250 kgs 551 lbs
T slots 14x100x3 mm
0.55×3.9×0.11 in
14x100x4 mm0
0.55×3.9×0.15 in
SPINDLE Spindle speed 10000 rpm 8000 rpm
Max. Tapping speed 4000 rpm 3000 rpm
Spindle taper 7/24 NO:30 7/24 NO:30
Direct drive Direct drive Belt
FEED RATE Rapid traverse (G00) 48/48/60 m/min
1890/1890/2362 ipm
48/48/48 m/min
1890/1890/1890 ipm
Cutting feedrate (G01) 10000 mm/min 394 ipm 10000 mm/min 394 ipm
Pull stud P30T-1 MAS403-45° P30T-1 MAS403-45°
Magazine capacity 12 12
Max. tool length 200 mm 7.87 in 250 mm 9.84 in
Max. tool diameter 80 mm 3.15 in 100 mm 3.93 in
Max. tool weight 2.5 kgs 5.51 lbs 3 kgs 6.6 lbs
Tool to tool 1.4 sec 1.8 sec
Chip to chip 2.3 sec 2.5 sec
MOTOR X-axis 1.5 kw 2 HP 1.5 kw 2 HP
Y-axis 1.5 kw 2 HP 1.5 kw 2 HP
Z-axis 3.0 kw 4 HP 3.0 kw 4 HP
spindle 3.7/2.2 kw 5 HP/3HP 5.5/3.7 kw 7 HP/5HP
47x90x92 in
155X252X280 cm
61x99x110 in
Net weight 2380 kgs 5250 lbs 3200 kgs 7050 lbs

Standard Accessories

  • Spindle air blow device
  • Work light (PL light)
  • Tool cooling system and coolant tank
  • Leveling bolts and pads
  • Double-door type heat insulated electrical cabinet with heat exchanger
  • Screw-type chip conveyor
  • Automatic lubrication system
  • Tool kit and tool box
  • Dual-color LED alarm light
  • TFT LCD monitor

Optional Accessories

  • Armless 21-tool ATC
  • Spindle motor 15,000 rpm
  • High pressure coolant through spindle (20 bar)
  • Automatic tool length measurement with
  • Breakage detection
  • Automatic door
  • Transformer
  • Workpiece air blow system
  • 5C indexer
  • 4th axis
  • 5th axis