A New Standard of Tapping Center

tr-51e

High Acceleration

high Based on advanced design concepts, Cubic introduces a new generation of CNC tapping centers. Each machine exhibits the efficiency and accuracy you’ve come to expect.

Machine Structure

TR-45E-inside The structural parts of the machine are manufactured from high quality Meehanite cast iron, rib reinforced and stress relieved to assure the machine remains deformation-free year after year. Servo motors directly drive ballscrews, providing high positioning accuracy without backlash.

Structure

TR-510-3

Chip Auger

A chip auger is mounted at the center of the base, delivering chips to the chip cart located at the backside of machine. The chip auger frees operator from manually removing and chips while maintaining a clean interior of machine at all times.

X, Y-axis Telescopic Guard

The telescopic guards on X, Y-axis prevent chips from coolant from damaging linear ways.
TR-45E-structure-3

Linear Ways on 3 Axes

The X, Y, Z-axis slideways are mounted with precision linear guide ways, combined with great span between guides, exhibiting maximum stability during high speed traverse. The ball type linear ways feature low friction coefficient and high positioning accuracy. The three axes are driven by FANUC digital AC servo motors with fast acceleration and deceleration.
TR-510-4

Z-axis Telescopic Guard

To meet the high speed traverse of Z-axis, the guard is a combination of canvas and steel plates. It provides superior protection for linear ways and extends their service life.

armless

Automatic tool changer

  • TR-510 / TR-600 / TR-700
  • #30 Armless Type Magazine
  • 12 tools
Tool change time

1.4 sec.

(Tool to Tool)

Magazine-21tools

21 Tool Servo ATC (optional)

spindle-#30-new

High Precision Spindle

  • TR-510 / TR-600 / TR-700
  • #30 Taper
  • Direct Drive
Spindle Speed

10,000 min-1

NBT with two sides binding

15,000 min-1 (optional)

Control Specifications

control-1-b286be95
Fanuc
MODEL Oi-MD
CPU 32 bit
Max. controlled axes 4
Max. simultaneous axes 4
Program storage length 320 M
Macro variables common 600
Tool offset sets 200
Conversational programming O
Display 8.4” TFT LCD
Multi-language display O
Servo system with ABS. encoder O
Memory card O
Ethernet O
High speed and accuracy machining code G0.5.1 Q1
RS-232 interface O
Program route simulation O

Quality Control

QC-p2-new
The positioning accuracy is inspected by using Agilent Technologies laserinterferometer unit. Positioning accuracy in full travel is less than 0.010m
QC-p1-new
QC-p3-new
Diameter Ø100 mm, F=3000 mm/min, circularity 0.010 mm. HEIDENHAIN grid encoder is used to ensure dynamic contouring accuracy.

Optional Equipment

Opt-p4

Movable, large capacity coolant tank

  • Equipped with castors for pulling the coolant tank out from the machine. This permits convenient and fast cleaning of tank inside.
  • The large capacity coolant tank is equipped with filter screen to filter coolant impurity.
Opt-p6

CNC rotary table (4th or 5th axis)

The use of motor with absolute encoder on tilting shaft is recomended.
Opt-p5

5C indexer

Opt-p2

Tool length measurement and breakage detection

Opt-p3

Transformer and Spindle oil chiller

Specifications

MODEL TR-510 TR-600 TR-700
TRAVEL X-axis 510 mm 20 in 600 mm 23.6 in 700 mm 27.5 in
Y-axis 400 mm 15.7 in 400 mm 15.7 in 400 mm 15.7 in
Z-axis 350 mm 13.8 in 350 mm 13.8 in 350 mm 13.8 in
Table to spindle nose 150~500 mm 5.9~19.7 in 150~500 mm 5.9~19.7 in 150~500 mm 5.9~19.7 in
TABLE Table area 600×420 mm 23.6×16.53 in 700×420 mm 27.5×16.53 in 850×420 mm 33.5×16.53 in
Max. load 250 kgs 551 lbs 250 kgs 551 lbs 250 kgs 551 lbs
T slots 14x100x3 mm 0.55×3.9×0.11 in 14x100x4 mm 0.55×3.9×0.15 in 14x100x4 mm 0.55×3.9×0.15 in
SPINDLE Spindle speed 10000 rpm (15000 rpm optional) 10000 rpm (15000 rpm optional) 10000 rpm (15000 rpm optional)
Max. Tapping speed 4000 rpm 4000 rpm 4000 rpm
Spindle taper 7/24 NO:30 7/24 NO:30 7/24 NO:30
Direct drive Direct drive Direct drive
FEED RATE Rapid traverse (G00) 48/48/60 m/min 1890/1890/2362 ipm 48/48/60 m/min 1890/1890/2362 ipm 48/48/60 m/min 1890/1890/2362 ipm
Cutting feedrate (G01) 10000 mm/min 394 ipm 10000 mm/min 394 ipm 10000 mm/min 394 ipm
AUTOMATIC TOOL CHANGER Tool shank BT#30 BT#30 BT#30
Pull stud P30T-1 MAS403-45° P30T-1 MAS403-45° P30T-1 MAS403-45°
Magazine type ARMLESS ARMLESS ARMLESS
Magazine capacity 12 (21 optional) 12 (21 optional) 12 (21 optional)
Max. tool length 200 mm 7.87 in 200 mm 7.87 in 200 mm 7.87 in
Max. tool diameter 100 mm 3.94 in 100 mm 3.94 in 100 mm 3.94 in
Max. tool weight 2.5 kgs 5.51 lbs 2.5 kgs 5.51 lbs 2.5 kgs 5.51 lbs
Tool to tool 1.4 sec 1.4 sec 1.4 sec
Chip to chip 2.3 sec 2.3 sec 2.3 sec
MOTOR X-axis 1.5 kw 2 HP 1.5 kw 2 HP 1.5 kw 2 HP
Y-axis 1.5 kw 2 HP 1.5 kw 2 HP 1.5 kw 2 HP
Z-axis 3.0 kw 4 HP 3.0 kw 4 HP 3.0 kw 4 HP
spindle 3.7/2.2 kw 5 HP/3HP 3.7/2.2 kw 5 HP/3HP 3.7/2.2 kw 5 HP/3HP
MACHINE SPECIFCIATIONS W x D x H 155×252 x260 cm 61x99x102 in 165×252 x260 cm 65x99x102 in 190×252 x260 cm 75x99x102 in
Net weight 3100 kgs 6834 lbs 3250 kgs 7165 lbs 3350 kgs 7385 lbs

Standard Accessories

  • Spindle air blow device
  • Work light (PL light)
  • Tool cooling system and coolant tank
  • Leveling bolts and pads
  • Double-door type heat insulated electrical cabinet with heat exchanger
  • Screw-type chip conveyor
  • Automatic lubrication system
  • Tool kit and tool box
  • Dual-color LED alarm light
  • TFT LCD monitor

Optional Accessories

  • Armless 21-tool ATC
  • Spindle motor 15,000 rpm
  • High pressure coolant through spindle (20 bar)
  • Automatic tool length measurement with
  • Breakage detection
  • Automatic door
  • Transformer
  • Workpiece air blow system
  • 5C indexer
  • 4th axis
  • 5th axis