H300 Compact Horizontal Machining Center

Compact size / 1889 ipm rapids / BT-40 taper / 30 or 50 tools / Pallet changer with B-axis

Download PDF brochure

Coolant Jets Around Spindle

With the use of coolant jets around spindle, heat generated during cutting can be removed effectively.

Coolant Through Spindle Device (Optional)

For upgrading deep hole drilling and boring capacity, an optional coolant through spindle device is recommended.
With the use of the coolant through spindle device, chip in the deep hole can be fast evacuated and hence increasing the machining accuracy and reducing considerable machining time.

Self-locking Rotary Table

Exclusively designed self-locking by spring.
Unlocked by pneumatic power for low-energy consumption. No table loosening due to a failure of hydraulic pressure.

Rotary Type Automatic Pallet Change

180° bi-directional rotary type automatic pallet change with maximum stability and dependability as well as low noise.

Roller Type Linear Ways on 3 Axes

Heavy duty roller type linear ways on X, Y, Z-axis , featuring high rigidity, low coefficient of friction and superior vibration dampening which results in improved surface finishes and accuracies.

The Simplest Tool Changer

The exclusively designed tool changer speeds up tool change cycle and minimizes the possibility of trouble during tool change.

Powerful, Accurate Table Clamping

Main stress only exerts on the internal and external cone surfaces instead on the casting part thus no deformation on the casting part will occur year after year.

0.001° Rotary Table (B-axis)

The rotary table is driven by a servo motor and provides 0.001° indexing unit, allowing 4 axes simultaneous control for machining complex work pieces.

Specifications

MODEL H300
TRAVEL X-axis 460 mm 18.11 in
Y-axis 350 mm 13.77 in
Z-axis 350 mm 13.77 in
Spindle nose to table center (min.) 100 mm 3.93 in
Spindle center to surface of table (min.) 60 mm 2.36 in
FEED RATE X, Y, Z axis rapid traverse 48 m/min 1889 ipm
Cutting feedrate 12 m/min 472 ipm
TABLE Pallet size 300 x 300 mm 1889 ipm
Max table loading capacity 250 kg 551 lbs
B-axis indexing degree 0.001°
Number of pallet 2
Pallet change method Rotary
Exchange time for APC 14 sec.
SPINDLE Spindle speed 10000 / 12000 / 20000RPM
Spindle taper BT-40
Transmission Belt drive
MOTOR Spindle motor 7.5 kW 10 HP
X, Y, Z, B axis motor 1.2 / 2.5 / 1.2 / 1.2 kW
ATC Tool magazine capacity 30 (40 / 50 Opt.)
Time of tool change (T to T) 1.2 sec.
Time of tool change (C to C) 5.5 sec.
Max tool weight 5 kg 11 lbs
Max tool size (dia. × length) Ø70 x 200L mm 2.75 dia x 7.87 in
Tool shank BT-40
Pull stud ISO 7388/2B
COOLANT TANK Coolant tank capacity 420 L 110 gallon
GENERAL INFORMATION Machine net weight 4500 kg 9920 lbs
Floor space required(L×W×H) 3380 × 2756 × 2440 mm 133 x 108 x 96 in
Shipment advice 40" high cube container