| Capacity |
GTV-27 |
GTV-42 |
| X Axis Travel |
11.8” (300mm) |
| Z Axis Travel |
7” (165mm) |
| Work Holding |
|
| Bar Capcity |
1.062” (27mm) |
1.654” (42mm) |
| Spindle Length with Collet Closer and Chuck |
30” (762mm) |
31” (787mm) |
| Collet Type |
5C |
16C, 42CR |
| Chuck Size |
5.3” (135mm) |
6” (152mm) |
| Spindle Configuration |
A2-4 |
A2-5 |
| Chuck / Collet Clamping System |
Hydraulic |
| Precision |
|
| Positional Repeatability |
0.000050” (0.00127mm) |
| Positional Accuracy |
0.000050” (0.00127mm) |
| Spindle Runout |
0.000050” (0.00127mm) |
| Simultaneous Axes |
X-Z-C (3 Axes), X-C & Z-C |
| Flat Plane Selection |
|
| CNC Control |
FAGOR 8055iTB Conversational or FANUC 0iMate-T |
| Axis Control System |
FAGOR Sercos digital or FANUC AC Digital (Fiber optic linked drives) |
| Performance |
|
| Spindle Motor Power (30 minute) |
7.3 HP (5.4 kilowatt) |
| Spindle Motor Power (continuous) |
5 HP (3.7 kilowatt) |
| Spindle RPM |
60~6000rpm |
| Axes Rapid Travel (X, Z) |
787 ipm (20 m/min) |
| Axis Maximum Feed Rate |
400 ipm(10.15m/min) |
| Axis Power Rating |
42 in-lb (5.2 Nm) |
| Tooling |
|
| Tooling Center Height |
1.653” (0.5”& 0.75” Opt.) |
| Miscellaneous |
|
| Coolant Capacity |
25 gallons (95 liter) |
| Coolant Pump Power |
½ hp (0.4 kilowatt) |
| Chip Conveyor Type |
Reversible Direction, CNC Controllable (Opt) |
| Compressed Air Requirement |
Only required if air live tools are requested |
| Total Power Required |
440VAC (220VAC on FANUC), 3 phase, 12 KVA |
| Dimensions w/o options (L x D x H) |
61” x 48” x 72” (1549mm x 1220mm x 1828mm) |
| Weight |
3750 lb (1704 kg) |
3800 lb (1724 kg) |
| * Design and specifications are subject to change without notice |
CLICK to Download 
